This is one of the most common problem nowadays. Your flash drive fails to detect when connected to the USB port.
This can happen due to two problems.
Problem 1 : Pendrive not detected
1. First of all check wheter the pen drive is working by plugging it in some other computer. If it works well there then it means that the drive is not faulty.
2. Go to start menu - run -type “devmgmt.msc” - cilick ok
a. Device manager will open up
b. click on the plus sign before “Universal Serial Bus Controllers”
c. Find your devce in the list (sometime it will be shown as USB Mass Storage Device)
d. Right click and update the drivers by uninstalling and reinstalling the drivers.
3. But if the Pen Drive comes up faulty then just get it replaced.
Problem 2: Pendrive detected, but not showing up in the drive list
This problem is caused when Windows fails to assign a new drive letter to the Portable Drive inserted for the first time.
1. Open Run, type “compmgmt.msc” and hit enter.
2. Now click “Disk Management” on the left side.
3. On the right side, right click on your USB Drive that appears in the disk management window and click change drive letter and paths.
4. Assign a new drive letter to the USB Drive which is not assigned to any other drive.
5. Now the Pen Drive will get displayed in My Computer.
This fix can also useful for people who just wish to change the drive letter of their USB Drive.
This can happen due to two problems.
Problem 1 : Pendrive not detected
1. First of all check wheter the pen drive is working by plugging it in some other computer. If it works well there then it means that the drive is not faulty.
2. Go to start menu - run -type “devmgmt.msc” - cilick ok
a. Device manager will open up
b. click on the plus sign before “Universal Serial Bus Controllers”
c. Find your devce in the list (sometime it will be shown as USB Mass Storage Device)
d. Right click and update the drivers by uninstalling and reinstalling the drivers.
3. But if the Pen Drive comes up faulty then just get it replaced.
Problem 2: Pendrive detected, but not showing up in the drive list
This problem is caused when Windows fails to assign a new drive letter to the Portable Drive inserted for the first time.
1. Open Run, type “compmgmt.msc” and hit enter.
2. Now click “Disk Management” on the left side.
3. On the right side, right click on your USB Drive that appears in the disk management window and click change drive letter and paths.
4. Assign a new drive letter to the USB Drive which is not assigned to any other drive.
5. Now the Pen Drive will get displayed in My Computer.
This fix can also useful for people who just wish to change the drive letter of their USB Drive.
0 comments:
Post a Comment